One-two - and you're done! The cord, twisted into a ring of three turns, is simply fixed in shape with a textile fastener, and then with varnish.
Tip: A small photo collection with the same frames looks best!
YOU WILL NEED For 1 frame with a diameter of approx. 16 cm: approx. 1.50 m of cord or rope with a diameter of approx. 7 mm; textile fixer (e.g. from Rayher Hobby); brush; aerosol black enamel; photos or color copies; photocardboard; glue.
DESCRIPTION OF WORK Twist the cord into a ring of 3 turns with a diameter of approx. 16 cm, tie the ends of the cord with a free knot and hide under the knot. The size and shape of the frame may vary depending on the size of the photo. Generously apply an amplifier for textiles on the cord with a brush, while finally finalizing the shape of the frame. Leave to dry completely.
From all sides spray black enamel onto the frame. Leave again until completely dry. The external contours of the finished frame should be transferred with a pencil to the photocardboard and cut. Stick the photo onto the photo board, then stick the photo board under the frame. If desired, attach a suspension bracket at the top.
Photo: Ian Perkins
Material prepared by Elena Karpova
