Changes in the detail of the back of a blouse 108 from Burda 2/2019 also require changes in the processing of the neckline, while significantly simplifying it.
To process the neckline of the blouse, we need:
✂ figured front bar (part 3) - 4 parts;
✂ backing of the neckline (detail 6) - 2 parts with a fold;
✂ non-woven;
✂ fabric marker;
✂ scissors for cutting;
✂ needles and threads for sewing;
✂ tailor pins;
✂ ruler for marking allowances
Master Class- Special offer
- 1
- 2
- 3
- 4
How to make the back of a blouse normal with a model 108 from Burda 2/2019
Step 1
Transfer the details of the curved strip of the front and the back of the neck to the tracing paper.
Move the necessary markup.
Cut out the details of the paper pattern.
Step 2
Duplicate the fabric with non-woven fabric.
Step 3. External details of a level and a facing
Apply the details of the paper pattern of the curved strip of the front and the back of the neck of the back to the duplicated fabric.
Pin and cut with allowances in all sections 1 cm.
Step 4. Internal details of a level and a facing
Place the details of the curved strip of the front and the back of the neck, cut out from the fabric duplicated in non-woven fabric, lay on the non-duplicated fabric with the front side to the front side.
Pin and cut.
Step 5
The details of the curved strip of the neck of the front without laying put on the facing of the neck of the back with the front side to the front side and chop.
Place the duplicated details of the front neck curly strip on the doubled back of the neck neck facing to the front side and chip.
Stitch shoulder sections.
Trim and iron the seam allowances.
Step 6
Fold the duplicated and non-duplicated details of the hem and the curved neckline with the front side facing the front side, aligning the shoulder seams.
Chip and grind along the inner cuts.
Cut the seam allowances close to the stitch, diagonally at the corners, cut them in the rounding sections.
Turn out the trim strip, sweep the edges and iron them carefully.
Sew the curly neckline to the edge.
Step 7
Pin or stitch the trim to the neckline with the front side to the front side, combining the midline and the shoulder seams. In this case, the right front end of the bar lies on top of the left end of the bar, the lines of the middle of the front are aligned.
Stitch the bar.
Cut and seam allowances together.
Unscrew the bar upward, iron the seam allowances for attaching the bar to the blouse.
Sew the blouse along the seam of the sewing of the curly strip of the neck close to the seam.
Cutting the neck with edging: master class
How to process the neck with a French edging
The secret to perfect grinding
The author of the master class and photo: Julia Dekanova
